As Amazon associates, we earn from purchases made on the website. If you make a purchase through links from this website, we may get a small share of the sale from Amazon and similar affiliate programs.

How to Clean the Bathroom?

The bathroom is used multiple times throughout the day and as such, it is one of the hardest working rooms in any house. The stark truth is that whether you live alone or share a house with others, there is often a build-up of limescale, grime, bacteria, and fungus in your bathroom. In addition to this, there might be gross and unwanted odors. This is all gross, but true. That’s why cleaning a bathroom is so important. Most people least like cleaning the bathroom because it can be a hard and daunting task. Considering all the unwanted build-ups, it’s safe to say that the bathroom often requires a deep clean.

You can clean the bathroom by using vinegar which is effective for most surfaces. So to clean your bathroom, pour vinegar over surfaces like the basin, the tiles, the bathtub, and the shower and get to scrubbing. For the toilet, use toilet cleaners and scrub thoroughly. 

How to Clean the Bathroom
How to Clean the Bathroom

No one likes the job of cleaning their bathrooms but by keeping up with it, the job can become a lot easier and less painful. Fear not, however. If you were wondering how to go about cleaning your bathroom, we have you covered. This article is a comprehensive guide on how you can go about cleaning your bathroom. Follow the tips herein to efficiently clean your bathroom without wasting a lot of time and energy. So sit back, relax, and read on to find out more. This will for sure be an insightful read for you.

How Do I Clean the Basin?

Perhaps one of the first places to show gunk and grime is the bathroom basin. It harbors quite a ton of germs. This is because it usually doesn’t take long for it to become covered in toothpaste, soap, make-up, and mineral deposits. Basins are used so frequently and to prevent the build-up of these germs, gunk, and grime it’s always important to clean them. The good news is that it doesn’t take a lot of time to do so. On average it will take you around 20-30 minutes to get it completely clean.

Cleaning the basin is one of the easiest things to do. It only requires a few specific materials and you’re good to go. We are going to discuss how to effectively and thoroughly clean your bathroom basin using different materials and methods so definitely read on.

Using Vinegar

In the first method, you can use vinegar. Vinegar is one of the best cleaning materials because it is easy to use, has antibacterial properties, and is affordable. It also has no nasty chemicals that can affect your basin or you when cleaning. You’ll require to have a scouring cloth at hand.

1. So what you do first is pour vinegar into the basin.

2. After pouring it into the basin, you soak paper towels in vinegar and cover the basin in them.

3. Next, you leave it to rest for 20 minutes and then remove the paper towels afterward. Proceed to scrub the basin with your scouring pad and then rinse it thoroughly with water.

After this, you are done cleaning the basin. Any lingering smell and gunk will be removed and the basin will be sparkling clean.

If your basin is made of colored porcelain, avoid using vinegar because it can damage the surface and discolor it. You also shouldn’t use vinegar on marble because its acidic properties will dull the shine.

Using Baking Soda

Baking Soda will get your basin clean too. It has alkaline properties that will help to remove any unsightly stains and scum from your basin. It is relatively easy to use this product for this purpose. Follow these simple steps to effectively clean your basing using baking soda.

1. To clean a porcelain or stainless steel basin you first of all need to wet the basin’s surface with warm water. This will shift the bulk of the dirt and shift/loosen any gunk that is attached to the surface.

2. Next, sprinkle the baking soda over the surface of your basin and proceed to use a cloth to rub it and a paste will form. You can scoop some of this paste onto an old toothbrush and use it to get into the hard-to-reach places like around the taps and the plughole for a thorough scrub.

3. Proceed to rinse the basin to remove the baking soda residue. Wipe the surface with a soft cloth and you will be left with a sparkling clean basin.

Using Lemon and Salt

One of the most common unsightly blemishes on basins is rust which is a common occurrence. So if you have this in your bathroom, the good news is that it is relatively easy to remove these stains from your basin. You just need lemon and salt.

All you need to do to remove the rust is to pour salt onto a slice of lemon and rub it over the rust stains. When the stains loosen, proceed to wipe them down with a soft cloth and then rinse with water. This will completely get rid of the rust stains on your basin.

Using Cleaning agents and Detergents

Most of the chemicals used in cleaning agents can be harmful to human health. The chemicals are often classified as irritants and allergenic. So if you decide to use these to clean your basin, you should be very careful. While they are not so recommended, they still work perfectly to clean your basin. Follow these simple steps to clean your basin using cleaning agents.

1. First, pour hot water over your basin to loosen any gunk on your basin.

2. Proceed to pour your detergent or cleaning agent of choice over your basin.

3. Leave it for about 5 minutes and after this scrub thoroughly. Make sure that you are wearing protective gloves when doing this.

4. Once you have done this rinse your basin and it will be sparkling clean.

So as you can see, cleaning the basin is quite simple and easy. We recommend using the first three methods because cleaning agents can be harmful to your health.

How Do I Clean the Tiles?

One of the foremost dirty signs of dirt, grime, and gunk in a bathroom is usually visible in the tiles. At times they can be quite troublesome to clean and for this reason, we have prepared some easy steps for you to follow to effectively clean them. So follow them diligently and you will have sparkling clean bathroom tiles in no time.

The first step is to make your homemade tile cleaning solution. You can choose to do a baking soda mix, lemon mix, or vinegar mix. We recommend the baking soda method since it is quite effective at removing grime from tiles. To clean bathroom tiles using baking soda, follow these steps:

1. Mix 2 parts baking soda with one part liquid soap and one part water. Pour this solution into an empty spray bottle.

2. Pour hot water over the tiles. This will soften the grime and make it easy to clean off.

3. Take the spray bottle and spray the solution onto the tiles and let it sit for several minutes to fully dissolve the grime.

4. Proceed to scrub the tiles using a brush, or wipe the tiles with a microfiber cloth. After this pour water to rinse. Your bathroom tiles will thus be sparkling clean.

How Do I Clean the Toilet?

One of the most unappealing chores in any house is cleaning the toilet. Contrary to what most people believe, it’s not that complicated to clean the toilet. The truth, however, is that it is easy to get it wrong. There is a right and proper way to clean the toilet- a method that can prevent the build-up and spread of bacteria that may be thriving in your bathroom. Following the proper cleaning technique will not only give you superior results but will also save you time and energy.

Some of the things you will require include:

  • Rubber gloves.
  • Toilet brush.
  • Toilet cleaner.
  • All-purpose spray cleaner.
  • Cleaning sponge.

Follow these steps to clean your toilet efficiently.

1. First of all, you need to put on your gloves. After this, proceed to flush the toilet to moisten the inside of the bowl.

2. Next, apply the toilet cleaner to the edges of the toilet bowl. Make sure to put a generous amount under the rim.

3. Using the brush, scrub down the bowl, and don’t forget the underside of the rim. You should check your toilet cleaner for instructions. For tough stains, you may need to leave the cleaner for a few minutes.

4. Flush the toilet once again. Repeat the steps above until you are satisfied with the outcome.

5. Using the all-purpose spray cleaner and sponge, swab the seat, lid, and the rest of the toilet. After this, you can either wipe the whole surface down with a clean cloth or wait for the disinfectant to dry before use.

Remember that you shouldn’t mix acidic toilet cleaners with bleach-based sprays or vice versa. It’s important to follow the instructions on the labels of the toilet cleaning products.

How Do I Clean the Shower?

Whenever you step into a shower, you expect to emerge fresh and clean. But where does all that soapy body soil and dirt go? Most of it usually lands on the surfaces in the shower where it attracts bacteria, mildew spores, grime, and gunk. Hair is also a major nuisance in showers when it accumulates. So because of this, cleaning showers is a must-do chore for your house.

It may sound simple, but learning how to clean a shower isn’t just about cleaning. It is also about minimizing the growth of mold and keeping germs and bacteria at bay. This is the best way to clean a shower.

 A shower should be cleaned thoroughly weekly or even more often if possible. Shower curtains should also be washed at least once in a while or often if needed. If you don’t have much time at hand, consider carrying out a quick cleaning routine after you shower. Clear the drain of excessive hair and use a squeegee to wipe down walls and doors.

You can follow these simple steps to clean your shower effectively:

1. Before getting started, remove all the shower accessories and products from the area. Wipe them down with a cloth dipped in hot water to remove any accumulated grime. Proceed to open the door, turn on the bathroom fan, and gather your supplies.

2. Next, unclog the drain. This is perhaps the most difficult part for a lot of people. It’s easy to get grossed out by this but it has to be done.  There are a lot of contraptions in the market that can be used for this purpose. A straightened-out wire hanger will also do the trick.

3. Next, rinse the shower walls and apply the cleaner. Give it about 10 minutes to break down the dirt and grime in the walls. For soap scum and grime, you can use a natural solution made of equal parts white vinegar and hot water. Vinegar is safe for use on ceramic tiles and fiberglass. If your shower is made of marble, do not use vinegar because it will reduce the shine. Use a soft-bristled brush or sponge to scrub the tiles. After this rinse the walls completely.

4. For the floor, you can use the same mixture of vinegar and hot water. For added scrubbing assistance, sprinkle some baking soda. Allow this to sit for at least 10 minutes and then rinse.

5. With a tool of your choice, scrub the floor. Consider spending more time on the areas where grime tends to accumulate. When the surface is clean, rinse it completely.

6. If you have a shower door, rinse it with water and then coat it with the same cleaning mixture. After about 10 minutes, wipe it down and then rinse it. Use a squeegee to wipe the door dry.

7. If you have shower curtains, remove them as well as the liners. Both of them (unless otherwise noted) are washing machine safe. So toss them in there and hang them out to dry once they are clean enough.

8. If your showerhead is clogged too, grab a sandwich bag and fill it with 2 teaspoons of baking soda and half a cup of vinegar. Attach this to your showerhead and make sure it is fully submerged in the cleaning solution. Leave it overnight and remove it in the morning. Turn the hot water on at full strength. This will get rid of any build-up.

If you have stains such as rust left in the shower, apply a paste of lemon juice and baking soda. Leave it for a few minutes and scrub it, and then rinse it. If the stain is persistent you can use commercial cleaners that contain oxalic acid.

Overall, the best way to clean is to make an easy task and adopt a “clean as you go approach”. Follow the steps above and you will be good to go.

How Do I Clean the Bathtub?

There is nothing most people enjoy more than a long and leisurely soak in a hot bath to soothe the body after a long and stressful day at work. The issue however is that bathtubs are infamous for being magnets of scum, mildew, and grime, not to mention stubborn stains caused by rust and hard water. Nobody wants to take a relaxing soak in a dirty bathtub. Ignoring a dirty bathtub will only make cleaning it harder. That’s why a regular bathtub cleaning routine is important.

But cleaning a bathtub isn’t as hard as it may seem. Some of the things you will require include:

  • Baking soda.
  • Warm water.
  • Microfiber cloth or sponge.
  • Small cleaning brush.
  • Dish soap.

To clean your bathtub using baking soda, follow these simple steps and you will have a sparkling tub within no time.

1. Fill up a bucket with warm water and pour it all over the tub. This will loosen up all the gunk and grime making it easier for you to clean the tub.

2. Next, sprinkle baking soda on all the surfaces of the tub. For extra dirty tubs, use tub-and-tile cleaner instead.

3. Fill a bucket with some hot water and a few tablespoons of dish soap. Dip a sponge or stiff nylon brush into the bucket and scrub the bathtub surfaces. If the tub is especially dirty, sprinkle baking soda directly onto the sponge or brush and use it to scrub hard.

4. Proceed to clean the faucet, the drain, and the handles. Once you are satisfied that it is clean, rinse the tub. 

Pay close attention to the drain and scour it.

If the stains are tough, make a bathtub cleaner paste of one part hydrogen peroxide and two parts baking soda. Rub the paste on the stains and leave it for 30 minutes. After this wipe and rinse it and repeat if necessary.

How Do You Get Your Bathroom to Smell Good?

Your bathroom is possibly the one room in your house that tends to smell awful. With our busy schedules every day, it’s usually pretty hard to clean the bathroom daily. We, therefore, are forced to come up with ways to keep the horrid smell that emanates from there at bay.

The natural question is therefore how do you get your bathroom to smell good? Well, there are quite a few things you can do to achieve this and we are going to talk about them in this article. So buckle up and prepare for the ride.

  1. Air it out

One of the misfortunes that befall a damp bathroom is that it can develop a musty and mildew odor. So to keep your bathroom smelling fresh, leave the bathroom fan running or open a window after a shower. This will enable the steam to dissipate and keep your walls and floors dry.

  1. Use odor neutralizing toilet drop-in

Toilets are the biggest bathroom stench, culprits. You can avoid this by using toilet drop-ins. These help keep the toilet cleaned, disinfected, and deodorized. They normally go in the bank of the tank.

  1. Use automatic bathroom air fresheners

Freshening air in the bathroom can be difficult at best, but with an automatic air freshener, you are assured that your bathroom will always smell good. Some of these fresheners contain essential oils and other natural ingredients and these are the ones we recommend.

  1. Upgrade your soaps

Having quality soaps with pleasant fragrances in your bathroom can go a long way in making your bathroom smell good. So invest in them instead of just normal odorless soaps.

  1. Keep your drains cleaned out

Bathroom drains are a common culprit when it comes to bad smells in the bathroom. So cleaning your drains often is a good idea if you’d like a good smell in your bathroom.

  1. Dry up moisture

Always hang up towels and bathmats to dry and wash them regularly. This will ensure your bathroom is always smelling fresh.

  1. Use dehumidifier

A humidifier is also a good option if you want your bathroom to smell good. It will alleviate any moisture in your bathroom thus preventing it from accumulating a musty smell.

How Often Should You Clean the Bathroom?

The bathroom might be the least of your favorite places to clean. But the truth is that it sure needs attention. If you’d like to avoid mold and mildew in your bathroom, then ensure that moisture levels remain at a bare minimum.

The question remains, however, about how long you should clean the bathroom. There isn’t a direct answer to this question. Most people argue that a weekly clean-up is most ideal. In such a case it’s important to keep a daily counter attack so that the dirt doesn’t build up.

If you go the weekly route, choose a day that is convenient for you and on which you have enough time to embark on a deep cleanse of your bathroom. If you keep the bathroom moisture-free and stay on top of the counters then you shouldn’t have to do much. You’ll just have to focus on the toilet, sink, floor, and bathtub. Don’t forget the counters, sinks, and faucets.

The secret to making your weekly deep cleanse easy is to keep your bathroom as clean and tidy as possible at all times. At the end of the day, carry out some minor cleansing. When the weekly cleanup comes, you won’t have so much to do.

How Often to Change Towels?

There has always been a debate about how often bath towels should be changed. Some people often think they can go for weeks without switching out a bath towel for a clean new one. The truth, however, is that it’s quite important to switch out bath towels.

Whenever you dry off with towels they get quite moist. This porous and damp environment is usually the perfect breeding ground for bacteria. A common bath towel can have yeast, mold, and E. coli. growing on it without your knowledge.

So how often towels should be changed? Most people agree that after every 3 to 4 uses, bath towels should be switched out for new ones. Not “days” but “uses”. If the person using the towel is sick, it should be tossed in the laundry after one use to prevent the spread of germs. If it’s flu season, every family member should have their own towel.

Always make sure they dry well to prevent moisture build-up. After use, ensure that they are well dried too. All in all, after 3 to 4 uses sounds like a pretty good idea to switch out the towels.

As you can see, cleaning the bathroom can be a simple business. All you need to do is ensure you actively clean your bathroom often to prevent the buildup of gunk and grime. Follow the steps discussed in this article and you’ll be good to go.

To clean a porcelain or stainless steel basin you first of all need to wet the basin’s surface with warm water. This will shift the bulk of the dirt and shift/loosen any gunk that is attached to the surface.

Next, sprinkle the baking soda over the surface of your basin and proceed to use a cloth to rub it and a paste will form. You can scoop some of this paste onto an old toothbrush and use it to get into the hard-to-reach places like around the taps and the plughole for a thorough scrub.

Proceed to rinse the basin to remove the baking soda residue. Wipe the surface with a soft cloth and you will be left with a sparkling clean basin.

How to Clean the Bathroom?
Scroll to top